Good day,

I am in the process of remodeling a bath room and I am at a point where I am not quite sure what to do... I have a cast iron flange with a cast iron riser and shower pan drain in a sunken slab that I would like to replace but with a small extension on the riser to accommodate the new mud bed to be level with the normal slab height. I have attached a couple pictures and would like advice on how might be the best way to address this situation.

Any help would be greatly appreciated... thanks in advance.
Danny

http://thumb7.webshots.net/t/60/460/...7AdMnyL_th.jpg

http://thumb7.webshots.net/t/64/564/...7chGDED_th.jpg

You are going to need Speedball1 for this and I believe he is off for the night. Maybe he'll catch this Thursday morning.