Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Tub Size (https://www.askmehelpdesk.com/showthread.php?t=136944)

  • Oct 4, 2007, 05:51 AM
    Woodbob
    Tub Size
    Would like to change a tub on a slab from a 30" to a 32". Also a much deeper tub.

    Will I have much too do to line up the new drain? I can get to the "P Trap" through a
    Wall in the next room.

    Also, how do I know if the existing hot water tank will have enough hot water through the 1/2" piping?

    Also, do I need a small cement "Mud" base under the tub to stiffen it or are the new
    Fiberglass tubs stronger now?

    Thank you
  • Oct 4, 2007, 07:39 AM
    speedball1
    Quote:

    1) Will I have much too do to line up the new drain? I can get to the "PTrap" through a wall in the next room.
    2) how do I know if the existing hot water tank will have enough hot water through the 1/2" piping?
    3) do I need a small cement "Mud" base under the tub to stiffen it or are the new fiberglass tubs stronger now?
    1) You will have to move the trap a inch or so. See if it will swing over that much.
    2) A 40 gallon hot water tank should be plenty big enough to handle your larger tub.
    3) If all the manufacture put under the tub is a styrofoam base then it's advisable to mud in the bottom for support.
    Good luck. Tom

  • All times are GMT -7. The time now is 10:31 AM.