Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   How to use the same drain.vent for utility sink in laundry room? (https://www.askmehelpdesk.com/showthread.php?t=732637)

  • Feb 6, 2013, 05:42 PM
    ncinqueg
    Gotcha! So you would still just recommend the standard double sanitary tee then?
  • Feb 6, 2013, 05:48 PM
    massplumber2008
    Yes, but I want you to know that the best way to pipe this, BY CODE, is the way I drew it up at post#9. This will work just fine, but may not be approved by all codes, OK?

    Mark
  • Feb 7, 2013, 07:36 AM
    ncinqueg
    1 Attachment(s)
    Mark - One last follow up question. From your response, it sounds like a double sanitary tee is not code.

    However, if I use a similar one called a "Double Fixture", would that work? Or is that still not code either?
  • Feb 7, 2013, 04:34 PM
    massplumber2008
    That fitting is better than a double wye fitting, but unfortunately I can't speak to code in your area... can just make generalizations.

    If you want to do this by code that is accepted everywhere, you really need to follow the drawing I posted at post #9.

  • All times are GMT -7. The time now is 12:11 AM.