Ask Experts Questions for FREE Help !
Ask
    LANKY84's Avatar
    LANKY84 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2012, 07:55 AM
    2008 tory bilt pony won't start or do anyting
    I have a 2008 troy bilt pony I changed ignition switch, solenoid, spark plug, checked all the wires, new fuse and still won't do anything not even click. Starter is good, gas is good, air filter is good, battery is good. I don't know.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jun 7, 2012, 07:56 AM
    Quote Originally Posted by LANKY84 View Post
    I have a 2008 troy bilt pony i changed ignition switch, solenoid, spark plug, checked all the wires, new fuse and still wont do anything not even click. Starter is good, gas is good, air filter is good, battery is good. I don't know.
    How did you determine the battery was good? This is important...
    LANKY84's Avatar
    LANKY84 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 7, 2012, 08:07 AM
    Quote Originally Posted by smoothy View Post
    how did you determine the battery was good? This is important...
    Brand new and just took it off the charger
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #4

    Jun 7, 2012, 08:32 AM
    Do you have a digital voltmeter to verify where you are actually gettig power to? (Wires can have breaks under the insulation)
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #5

    Jul 8, 2012, 04:24 PM
    Hi,
    MTD, like many other manufacturers, often uses a smaller wire with an eyelet to energize the wiring harness. This wire MUST be attached to the same post on the solenoid as the battery is connected to.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2007 17.5 HP troy bilt pony will run but won't move [ 2 Answers ]

I have no prblem starting it up but in Forward gear and reverse gear it won't move. I have changed the drive belt because when it is in gear and running the drive belt spins ( and smokes a little ). Even when the mower is off and in neutral the back tires will not move, any suggestions?

2008 troy-bilt pony won't start [ 1 Answers ]

My 2008 Troy-Bilt Pony won't start. I jumped battery, nothing. It's in "N", blade disengaged, parking brake on, sitting on seat. Won't start. New plug, fuel & air filter, oil change, fresh gas. I had the mower elevated in the front to remove blades, left it elevated for about 2 weeks. When I took...

Tory bilt pony [ 1 Answers ]

How do I change the blades on a troy bilt pony?what size wrench and do I turn it clockwise or counter clockwise to loosen?

Troy Bilt Pony Mower Won't Start [ 1 Answers ]

I got out my Troy Bilt Pony Riding Mower today to cut the grass for the first time this Spring and it wouldn't do anything when I turned the key. I bought a new battery and installed it and then it just clicked when I tried to start the mower. I replaced the spark plug and it still doesn't start....

Troy Bilt Pony will not start [ 4 Answers ]

I've had it for three years. Went out today to mow for first time this year, and it won't even crank. New battery? New sparkplug? And where can I get these?

View more questions Search