I need to know how I replace the belt on my Snapper SR1333 riding mower. I just purchased a belt and now I need to know how to change it. I thought it was a quick fix but I guess that's what I get for thinking. :)

To Replace The Belt, Remove The Four Bolts Holding The Deck Pulley Cover, Remove Cover. Press And Lock The Brake/clutch Pedal, Remove The Tensioner Pulley From The Bracket, Then Remove The Belt From The Other Deck Pulleys. Then Remove The Battery. Then Stand The Unit Up On Its Rear End And Place The Gear Shift Lever To The Top Gear, Remove The Belt From The Side Of The Pulley With The Most Room For Your Hands, Move Belt Past Clutch Wheel, And Then , Move The Gear Shift Lever To The Reverse Position, Now You Will Be Able To Slip The Belt Right Off. To Reinstall , Just Reverse These Steps.

Need a belt for my snapper mower about don't know what kind I need

[QUOTE=buckshot06824need a belt for my snapper mower about don't know what kind I need

Belt on rear of 42" zero turn snapper it popped off how do u put it back on was able to push tension pulley and slip back on but now it is all the way off need a guide