 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lawn mower sometimes won't move.
I just changed the belt on my 42 inch troy built. It runs and will cut then all of a sudden it stops moving, still running, still cutting just won't move. I have to disengage the blade put in reverse then back in forward. That works sometimes. Sometimes I can wiggle in the seat forward and back and it will move but very slowly. Any suggestions on what to try.
|
||||
Check out some similar questions!
My John Deere riding lawn mower worked fine, It got a flat tire so I removed the tire and fixed it. I then replaced the tire. The lawn mower will turn on, the blades will engage, but the transmission won't engage. I checked the rod in the back of the lawn mower and it was in. I pulled it out and...
I had a flat tire and I removed the tire when I put it back on it would not move or go into gear. It would start and the blades would engage but not move. I took both tires off and one side would spin but not the other when in gear and of off the ground.
Can anyone help me, I have a riding lawnmower and it won't go forward or backwards? Does someone have a diagram on how a belt is suppose to be on the mower? It looks as if the belt is on there, a little bit of play in the belt I know is normal, but it just won't move, the blades still turn, but not...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
