 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Murray lawn mower will not move
I had a flat tire and I removed the tire when I put it back on it would not move or go into gear. It would start and the blades would engage but not move. I took both tires off and one side would spin but not the other when in gear and of off the ground.
|
||||
|
||||
|
On the motor shaft under the motor there is a belt just above the belt that goes to your blades. This belt goes back and goes around a pulley on your transmission. It is either off, broke or so loose it will not turn your transmission pulley. Replace belt. And mayby pulleys. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I can not get it to start, it will start with starter fluid and dies. I do not know how to remove the carb to clean it, can you advise and do you think this is the trouble. It has set up for a good little bit.
My Murray Riding Mower is 7 yrs old. When I last started the mower it started but does not move forward or backward. Can anyone asvise what could be wrong, e.g. transmission and is it worth repairing, or could it be repaired.
I have Murray Lawnmower that will not start. The engine will turn over slowly, almost like the battery is drained or dead. I have tried to jump it off and have changed the battery and it did not help. I had to replace the silenoid earlier in the year and have not had any problems until now. ...
Hello everybody, I bought this lawn mover 4.5 hp about a 1 1/2 years ago from someone else. It was practically new when I bought it. The guy decided to sell it because he sold his house and was moving to a condo. I used it for like 1/2 a year and then put it in storage for a year. When I got it...
:confused: does some have a diagram of the belt system on a Murray ridding lawn mower ?
View more questions Search
|
