Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Low cold water pressure in 2 showers... Not back to back config however
[ 8 Answers ]
My home is 16 years old, I've had it for 5 years. I am on a pump - with 70LBS high cutoff and 55lbs Low turn on. All copper - I have 2 Delta 1600 shower faucets - one tub spicket with shower diverter - one shower only. The tub/shower combo has allways had only a trickle of cold water and...
2 periods back to back with large blood clots!
[ 6 Answers ]
I have just stared yet another period after just ending one 5 days ago. I had major pain with the last one, I have never had that kind of pain before. Now with this period I just found an extremely large blood clot. Although it looked more like tissue then an actual bllod clot. What could this be...
Tax re: Full-time job in NJ and Part-time job in Brooklyn,NY
[ 1 Answers ]
Am a Jersey resident working full-time(40 hours, AGI~$60,000) in Jersey claiming 5. May be accepting position in Brooklyn, NY for additional part-time (16 hours,AGI~$19,000-23,000) Have read responses about resident in Jersey working in NY with one job. Since my part-time position is in NY, I...
Plumbing back to back shower valves
[ 5 Answers ]
I am plumbing 2 showers that share a wall (back to back). In order to get the hot and cold supplies to the proper side of each valve requires lots of twists and turns. I was advised by someone to just use ½” male threaded connectors on the supply lines (sweat fit to copper) and then simply use...
Interlocking plate back to back feed
[ 2 Answers ]
If I use a interlocking plate to backfeed my main(homelite 200amp)from my generator... from my garage... can I use the braker that is feeding the garage if I put it in the proper place to accommodate the interlocking plate? It's a 220 30 amp braker... so part of the question is... will the... View more questions Search
|