Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honeywell thermostat
[ 11 Answers ]
I installed a Honeywell CT87A 4447 thermostat this summer. It worked fine with my air conditioning, but I am having a problem with it controlling my furnace. It will turn the furnace on and I can turn the fan on manually, but when set to auto the fan does not come on. The thermostat has the...
Honeywell RTHY110B Thermostat
[ 1 Answers ]
My old thermostat Total line Gold P274-0109-0150-0200-0300 had six wires, red, yellow, green, blue, white, yellow, and orange. The orange wire connects to another orange wire connected to the Air condition unit outside. (See attach doc) But my new Honeywell RTH110B none programmable thermostat...
Honeywell thermostat
[ 2 Answers ]
Replacing lennox thermostat, with diagram G-green O-orange RH & RC- red, same wire spliced W-white Y-yellow Replacing with Honeywell T8400R model, diagram G-green C-blue
Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D
[ 1 Answers ]
Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...
Honeywell RTH230B Thermostat
[ 1 Answers ]
I recently installed Honeywell #RTH230B thermostat to replace and old Honeywell # T87F( old round non digitital type). I have oil burner with basebaord water heat. Since my olf thermostat was 2 wire only and I have no AC I pulled the jumper wire between Rh and Rc as per the instructions. Thj9is... View more questions Search
|