Ask Experts Questions for FREE Help !
Ask
    maxxedge's Avatar
    maxxedge Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2007, 12:06 PM
    Harbor Breeze Cefiro Celing Fan
    This is a remote control fan and on a regular basis it automaticaly goes from low to high speed.

    Would like to know what could cause this problem.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 5, 2007, 01:02 PM
    Try changing the frequency.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling Fan working, Fan light not, Harbor Breeze [ 7 Answers ]

I recently tried to help a friend install a Harbor Breeze ceiling fan w/ a light kit (this model 52" White Ceiling Fan ENERGY STARŪ) The fan has 4 wires: green, white, black, and blue. The house has 3 wires: green, white, and black. Per the instructions we hooked up the green to green,...

Harbor Breeze Remote-Only Fan w/o Fan Control [ 13 Answers ]

I have a newly installed Harbor Breeze fan that is controlled only via the remote. When the switch is in the ON position the fan comes on automatically and cannot be turned off. The remote correctly controls the light but does not work for the fan, i.e.. Changing the speed or turning it off. I...

Harbor breeze fan [ 4 Answers ]

I have a harbor breeze ceiling with a remote that was never wired in.can I reverse the fan direction manually.

Harbour Breeze Celing Fan wiring [ 1 Answers ]

Hi there I bought a fan with a remote. My electrician wired in a double switch with a red wire, along with the black and white and ground. Unfortunately the remote box wiring only has a black and white out so I don't know how to wire the red lead. I have wired it to the blue wiring on the fan...

Harbor Breeze fan [ 3 Answers ]

Just installed my fan and everything works perfectly. After 10 minutes, the HI speed does not work anymore when pushed on the remote (the fan is just stopped) and it looks like MED and LOW speeds are the same. Can anybody help me with this? Thanks

View more questions Search