Ask Experts Questions for FREE Help !
Ask
    alshaymah's Avatar
    alshaymah Posts: 31, Reputation: 0
    Junior Member
     
    #1

    Jun 4, 2007, 04:37 AM
    Why ceramic mug cools liquid faster?
    When you pour hot liquid into a ceramic mug or Styroform cup, the liquid in the ceramic cup quicly becomes a lot cooler than that in the Styroform. Why this happen?

    I think it is depends on the ceramic properties.
    Capuchin's Avatar
    Capuchin Posts: 5,255, Reputation: 656
    Uber Member
     
    #2

    Jun 4, 2007, 04:53 AM
    It's all to do with thermal conductivity:

    Polystyrene ~0.06 W/(m·K)
    Ceramic ~15 W/(m·K)

    Can you use these to explain the difference you observe?
    alshaymah's Avatar
    alshaymah Posts: 31, Reputation: 0
    Junior Member
     
    #3

    Jun 4, 2007, 06:00 AM
    I think the ceramic has low thermal conductivity that don't affected with the temperature :confused:

    I loses teperature quicly.
    :confused:
    Capuchin's Avatar
    Capuchin Posts: 5,255, Reputation: 656
    Uber Member
     
    #4

    Jun 4, 2007, 09:20 AM
    No, read the numbers again, ceramic has a HIUGH thermal conductivity

    This means that heat moves from the hot inside of the mug to the cold outside surface more quickly, where it can heat up the air around it.

    Polystyrene has a lowe thermal conductivity and so this process is much slower. So heat isn't lost so fast.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Attaching ceramic corner shelf to ceramic tiles [ 3 Answers ]

I want to add a couple of ceramic shelves to my bathroom ceramic tub surround. What can you use to attach ceramic shelves to ceramic tiles? I tried the same glue used to put tiles on the drywall but they just slide. Thanks in advance!

Liquid nitrogen [ 2 Answers ]

Can I buy in ISRAEL liquid nitrogen? If yes where can I buy it?

Liquid nitrogen [ 1 Answers ]

Where can I get liqid nitrogen in Union City, CA or Fremont,CA or Newark, CA or in Hayward, CA

Liquid nitrogen [ 8 Answers ]

Does any body know where I can get some liquid nitrogen in Alabama

A/C cools below set temperature [ 1 Answers ]

My A/C cools below the set temperature. I turned the Thermostat off and the furnace kept running. I had to turn off the furnace at the breaker. Trying to figure out what might be the problem.


View more questions Search