Ask Experts Questions for FREE Help !
Ask
    tdldoorman's Avatar
    tdldoorman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 3, 2007, 07:59 AM
    Blower only mode
    Hello I have a gas forced air furnace in my basement and a window air conditioner. I would like to recirculate some of the cool air from the basement to my upstairs. Any help would be appreciated Thanks Ted
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #2

    Jun 3, 2007, 10:50 AM
    Is there an auto/On fan switch on your theromstat? If so , simply switch it to "ON", this will run your blower. If it does not, then you will need to install a different T-Stat. remove the cover from the T-stat, How many wires are there? What is the model of you furnace?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat Q - Blower Does Not Turn ON in FAN Auto Mode [ 10 Answers ]

I just installed a NOMA 7-day programmable thermostat for an electric furnace/AC system (ceiling unit). I believe the wiring (5-wire) is correct. When I set it to COOL with Fan set to AUTO, it turns on the A/C and the fan automatically. Good. But when I set it to HEAT with Fan set to AUTO,...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 6 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

Furnace turns off at 'ON' mode and will not operate at 'AUTO' mode [ 2 Answers ]

The furnace will not turns on at "ON' mode. After some reading, I thought it would be the pilot light that has gone out. I re-lighted the pilot light to see blue-red flame, but the furnace will turn off AGAIN after 3-4 hrs. Replaced a new Honeywell non-programmable thermostat today with the...

Blower not working in AC mode [ 1 Answers ]

Blower for AC unit stopped working, the condenser unit is working outside. When switched from automatic to manual mode on thermostat the blower does not come on either. Set thermostat on the heat mode and the blower motor did come on. Any ideas?

Background mode? [ 2 Answers ]

What is background mode?A program in background mode has any feature?How to make a program run in background mode?Please explain to me.Thanks in advance.

View more questions Search