Ask Experts Questions for FREE Help !
Ask
    ray steward's Avatar
    ray steward Posts: 10, Reputation: 2
    New Member
    		  
    #1

    Jun 2, 2007, 07:21 AM
    Missing standby
    On my Windows XP system the Stanby Icon when I go to close down is greyed out, the only chang I have made to my system is to put in a new graphiocs card an ASUS GForce N6200, is this likely to be the cause, any suggestions as to what I need to do to get standby back.
    Thanks
    check_himu's Avatar
    check_himu Posts: 18, Reputation: 3
    New Member
    		  
    #2

    Jun 3, 2007, 03:03 AM
    Hello
    If you have cd of windows then repair your windows. I think it will solve problem
    ray steward's Avatar
    ray steward Posts: 10, Reputation: 2
    New Member
    		  
    #3

    Jun 6, 2007, 11:32 AM
    Thanks for the suggestion but my XP disk does not seem to have a repair facility
    Lowtax4eva's Avatar
    Lowtax4eva Posts: 2,467, Reputation: 190
    Ultra Member
    		  
    #4

    Jun 6, 2007, 11:41 AM
    Have you tried restarting since the new video card was detected?

    Also it may have installed some updates and wants to be restarted for that reason too

    So my suggestion is to power down and... restart
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Won't Go on standby [ 1 Answers ]

Getting message " drivernecpci to usb enhanced host controler is keeping this computer from goeing into standby mode. What is it , and how do I find it and get drivers for it? Thanks in advance for any help you may be able to give J.schoeler

Keeping the internet on while computer is on standby [ 2 Answers ]

OK, so I have sisters that try to take over my computer so I like to have it password protected... when the screen saver goes on though it kicks me off the internet. Is there any way I can keep the internet, aim, Google talk etc. on while the computer is still being locked?

Moniter standby [ 14 Answers ]

I decided to clean my heat sync and fans before I attempted to unlock my Athlon to make sure that the cooling I got was sufficient. I removed all the IDE cables and unplugged all the power cables, took my motherboard out of the case so I could get at things more easily. Then I detached the sync...

Monitor goes into standby immediately [ 14 Answers ]

A friend's computer has the following problem only if the printer is connected to the USB port of the computer when the computer and monitor are switched on. The monitor immddiately goes into standby and nothing can be seen on the screen. If the printer's USB cable is disconnected from the...

View more questions Search