Ask Experts Questions for FREE Help !
Ask
    Darrenyates's Avatar
    Darrenyates Posts: 6, Reputation: 1
    New Member
    		  
    #1

    May 31, 2007, 04:34 PM
    12vdc water solenoid valve
    How do I get a 12vdc water solenoid to open in three stages.
    This can be done by using Pulse Width Modulation.
    Does anyone know how to do this.
    caibuadday's Avatar
    caibuadday Posts: 460, Reputation: 10
    Full Member
    		  
    #2

    May 31, 2007, 07:42 PM
    Quote Originally Posted by Darrenyates
    How do I get a 12vdc water solenoid to open in three stages.
    Put 12vdc to the2 wires... 3stages or 3 way
    Darrenyates's Avatar
    Darrenyates Posts: 6, Reputation: 1
    New Member
    		  
    #3

    May 31, 2007, 07:58 PM
    Quote Originally Posted by Darrenyates
    How do I get a 12vdc water solenoid to open in three stages.
    To open 1/3 then 3/4 then fully. Thanks
    caibuadday's Avatar
    caibuadday Posts: 460, Reputation: 10
    Full Member
    		  
    #4

    Jun 1, 2007, 05:59 PM
    Quote Originally Posted by Darrenyates
    to open 1/3 then 3/4 then fully. thanks
    Sorry couldnot help you with that. I think it have multi voltages input to it
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Solenoid valve in refrigeration system [ 6 Answers ]

HI I have a question about Refrigration system that has two evaporator in one line, and each one has solenoid valae. What I want to know, why each one has solenoid valve, what is the purpose of that?

Surging water pressure & leaking water heater relief valve [ 19 Answers ]

Just recently the pressure of our water in the house surges when we turn a faucet on, and the city water company verified that our pressure in the house when we open a faucet is higher than the pressure in the lines in the street, and after the water runs is at a normal pressure (meaning their...

Potentiometer that handles 2 amps up to 12VDC [ 2 Answers ]

Hi, I am trying to make a 2amp 12VDC power supply adjustable. I was told to use a potentiometer. I need to know if this will work, and if so what size potentiometer to use. Any help will be appreciated.

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

Alternator solenoid valve fuse blowing with 1990 Honda Civic [ 0 Answers ]

A frined (I guess you could cal him that) gave me a 1990 Honda Civic that doensn't run... two problems: one problem is that the fuse to the alternator solenoid valve blows when I turn the key to start thus I can't get the codes from the EUC.. the other one is that there is no fuel getting into the...

View more questions Search