Ask Experts Questions for FREE Help !
Ask
    CMWesterhoff's Avatar
    CMWesterhoff Posts: 1, Reputation: 1
    New Member
     
    #1

    May 31, 2007, 11:46 AM
    Thermostat won't shut it off
    I had a problem about a month ago. I had my thermostat set on 68 heat auto. The temp went over 81 and continued to keep heating. When I got home to find this, I shut it off and replaced the thermostat. I went with a LUX programmable one. Last night I had the a/c on 74 cool auto. It got down to 65 in here and it continued to run. Anyone have any suggestions? Seems kind of strange that a $60 thermostat would be dead in a month, and even more strange that the old thermostat which was a 6 month old honeywell programmable would be doing the same thing. My home warranty company sent out a technician who said it was the thermostat. In reading online I read to disconnect the white wire from the furnace and the fan continued to stay on, it is not the thermostat. When I disconnected all the wires to the thermostat completely, the fan continued to run. It is a 10 year old carrier furnace and air conditioner. I can provide model numbers if necessary. Please help.

    Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    May 31, 2007, 03:13 PM
    Sounds like your thermostat is out of order since it controls the temperature. It could also be a stuck control in the furnace but I doupt that. It might be that the thermostat wired incorrectly. I would also recheck your thermostat wiring.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace T87F thermostat with digital thermostat [ 1 Answers ]

My T87F has two wires Red and White. No code indicating how to connect to the new digital on.

Shut down [ 2 Answers ]

Dwwin.exe dll initilization failed message when I log off or shut down the PC

Shut down [ 3 Answers ]

In my windows98 SE system, it is not showing "safe to shut down window" after I install some software or hardware to restart the computer or shut down the computer. It is struck at processing shut down. Please reply.

Shut offs [ 2 Answers ]

I am installing a few shut offs.. ball valve type. My question is, do the "lever"s have to be positioned at the top of the valve? Can the be mounted on the side or down... the valves will be installed horizontally.. Thanks.

Shut down [ 2 Answers ]

HI, My computer will not shut down from the start menu. Tom Windows 98 se When I want to shut down I go to start hit The shutdown dot. What I see is screen gets A little checkerboard like and screen changes To the shutdown window saying windows is


View more questions Search