Ask Experts Questions for FREE Help !
Ask
    michael23's Avatar
    michael23 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    May 30, 2007, 08:45 PM
    Simple series circuit
    A simple series circuit has two resistors, one 56ohm, the other is 120ohm and is connected to a supply voltage of 100 volts. Calculate the current flowing and the total power dissipated.
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    May 30, 2007, 09:02 PM
    https://www.askmehelpdesk.com/math-s...board-b-u.html
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
    		  
    #3

    May 31, 2007, 09:25 AM
    1. Do you know how to find the total resistance R of this circuit?

    2. You must memorize the formula V=iR. You know V and R; calculate I.

    3. Memorize that power = volts x current. You found current in step 2, so now you can calculate total power.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Simple beagle [ 1 Answers ]

Hello out there I'm new to this. I'm adopting a 7 y.o Beagle home raised the Beagle seems a overweight to me and is eating 1 cup of canidea a day plus table food. I read up on Canidea and it is high in Sodium should I wean him off it and try something new? If so what should I try

Outside GFI circuit - 15amp outlet on 20amp circuit [ 1 Answers ]

I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...

A simple program [ 1 Answers ]

Hello, I am to write a computer program to express the variation of specific heat Cp of air with Temperature as a third- degree polynomial, using the data in Table A-2b, in our book. The formula of Cp isn't important, I couldn't understand how the program is supposed to express the variation of...

View more questions Search