Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring 220V Single Phase 30 AMP car lift motor
[ 5 Answers ]
Recently I perchased 9000 pounds 2 post car lift, and only after car lift has arrived I've found out that the requirements for the motor are 220VAC Single Phase 30 AMP 60 Hz. Can somebody please explain how to use this motor safely with the standard power outlet. Thank you.
How am I going to size my 3 phase X'mer with 1 phase load using current as reference
[ 3 Answers ]
Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping
Wiring my garage for a 230 VAC single phase welder
[ 3 Answers ]
I am trying to wire a 220 outlet for my 230VAC single phase welder in my garage I have a 60a double breaker is it as simple as black and white w/ red stripe wires to breaker and green to ground? Thanks for any help
208v single phase wiring
[ 1 Answers ]
How do I connect a 208v single phase appliance to my home circuit panel? I installed a 30amp breaker which has 2 connections, red and black (hot), then I have white (neutral), and green for ground. The device only as 2 connectors not 3, plus ground? Thanks
120v/208v single phase appliance wiring
[ 2 Answers ]
Recently purchased a coffee machine that has the above reqts. I understand that it has 220 and 110v circuits that need power. I also purchased a generator to power this brewer outside. If I use a NEMA L14-30P plug, to connect into the generator, What is the sequence of wiring for the plug three... View more questions Search
|