Ask Experts Questions for FREE Help !
Ask
    Bob Caudle's Avatar
    Bob Caudle Posts: 3, Reputation: 1
    New Member
     
    #1

    May 26, 2007, 07:13 AM
    Kemore Elite Dryer not heating.
    Installed Heating Elment and 2 Thermal Cutoffs and dryer still does not heat. What is next step?
    Bob Caudle [email protected]
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    May 26, 2007, 07:58 AM
    Drum turns? Door switch OK? With timer set to heat and door closed, follow backwards from element back
    One thermal to next and beyond, until you find voltage. Can start from power also.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kemore Elite HE3T Washing Machine [ 1 Answers ]

I have a Kemore Elite HE3T Washing Machine, during the end of the washing cycle I get an message saying "SUD" with machine paused and beeping. I hit cancel button and have to rest the machine. Does anyone know how to fix this???Thanks....:confused:

Kenmore Elite Gas Dryer not heating [ 2 Answers ]

My 6-year-old Kenmore Elite gas dryer isn't heating. I hear the gas come on, and light, but it doesn't sound like it used to -- it seems to die off quickly, not stay strong. It sounds weak, or something. We had the dryer serviced about 2 years ago because of a faulty control panel, but the control...

Kemore Elite Heats but takes two cycles to dry [ 5 Answers ]

Hi, My dryer seams to heat up, but it takes at least two cycles to dry a load of cloths, I have cleaned the vent hose out and still no luck any suggestions.

Kenmore Elite HE3 Dryer Not Heating [ 1 Answers ]

I have a Kenmore Elite Dryer (electric) that is not heating. I pulled the toe panel so I could clean it out to see if that was the problem. After I cleaned it out I ran a short cycle and still no heat. I also noticed the heating coil did not change. Should these get hot, turn red during a drying...


View more questions Search