Ask Experts Questions for FREE Help !
Ask
    ray1006's Avatar
    ray1006 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 23, 2007, 09:33 PM
    18 hp briggs timing issue
    I had the screw on the carb choke valve come loose and go through engine. Have dis-assembled engine and checked and cleaned valves. Lined up dots on crankshaft ring gear and cam gear at top dead center; engine sounds like it is firing on intake. What is the proper procedure for aligning the valve cam gear with the crankshaft gear?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 24, 2007, 03:41 PM
    Sounds like you assembles your crank 180 degrees off. Lossen the cam gear and rotate one full turn, match dots and tighten.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a shower issue and venting issue [ 1 Answers ]

I have 4 showers in my house 1 downstairs and 3 upstairs. Two of the 3 upstairs have stopped having hotwater in them, shower A is a tub shower combined unit and has no hot water in it, shower B is a shower only with a jetted tub in the same bathroom but not single unit. The shower in B has no hot...

Timing on escort [ 1 Answers ]

What it the number 1 cylinder on the 1998 ford escort zx2 ?

Is it Really Bad Timing? [ 6 Answers ]

I need some advise from some female bloggers... Recently I've been dating a co-worker who has just ended a 3 1/2 year relationship about 4 months ago. We hit it off great as we have so many Things in common especially our outlook in life. However, when things started to get more serious in...

View more questions Search