 |
|
|
 |
New Member
|
|
Apr 30, 2005, 06:07 PM
|
|
Need help.. computer froze during upgrade from win98se to ME
I was upgrading my old computer from win98se to windows ME and it was doing good then at 66% of install it froze so I turned it off then back on and now all I get is the message "this version of windows only run on ms-dos 8.00." then I get C:\> what happened and please tell me how to fix it! It is my only computer and now wish I wouldn't have tried to upgade it. If anyone can help me I thank you!
|
|
 |
Computer Expert and Renaissance Man
|
|
May 1, 2005, 05:18 AM
|
|
Sounds like your PC was halted in the middle of the upgrade where the drive was setup but the install wasn't complete. I would try reinstalling Win 98 and see if that works. (I would not recommend upgrading to Me).
To reinstall you will probably need to boot to your Win 98 startup floppy then run the install from your CD.
|
|
 |
New Member
|
|
May 1, 2005, 09:20 AM
|
|
Computer froze during ME upgrade
Thanks scottgem but now I have another problem.. I don't have a 98 or ME start up disk and I have tried places like bootdisk.com and startup.com etc and none of them will work I get the message "remove disk or other media press any key to restart" but I have an old windows 95 start up disk and it will boot win 95... what do I do there? I thank you for your help in this matter.
|
|
 |
Ultra Member
|
|
May 2, 2005, 12:06 AM
|
|
Do you want 98 back? you could just go buy xp to put on it, but don't use ME
|
|
 |
New Member
|
|
May 2, 2005, 12:54 AM
|
|
Windows 98 vs windows xp
Well I will have to go back to windows 98 because my bro-in-law let me try his xp disk and I have too old of a computer and it says I can't do it without more of this and more of that.. I thought updatin to ME would be OK but now I see that a lot of you say its not good that win 98 is better... why? Anyway I still cannot get the computer going after it froze trying to install ME... if I would have know that you all think 98 is better I should not have tried the update. I know nothing about computers but I would take advice on how to get win 98 back then ill leave it alone... no more updates! Thanks
|
|
 |
New Member
|
|
May 2, 2005, 12:57 AM
|
|
Freeze up
Can anyone tell me why the start up disks downloaded from different places like boot disk and startup .com won't work but the old 95 startup does! Thanks
|
|
 |
Computer Expert and Renaissance Man
|
|
May 2, 2005, 05:29 AM
|
|
You don't explain what isn't working about those startup disks. The startup disk needs to have the CD drivers on it to read the CD.
|
|
 |
Senior Member
|
|
May 2, 2005, 10:10 AM
|
|
Upgrade
well I will have to go back to windows 98 because my bro-in-law let me try his xp disk
Don't bother with someone else's copy of XP,as it's configured to the motherboard,attachments,and PC drivers.Plus your brother-in-law's details are stored on servers at Redmond HQ.Microsoft take a dim view of that sort of thing,even if it's done "innocently".
.. I thought updatin to ME would be OK but now I see that a lot of you say its not good that win 98 is better... why?
ME was a rushed job,as Microsoft were messing about with Windows 2000,and also trying to concentrate on XP at the same time.It should really have been called 98 Third Edition,but was totally useless.It was buggy,unresponsive,and accident prone.Windows 98 Second Edition was/is far superior.Listen to what Scott said about needing the cd drivers to read the cd.
Nez.
|
|
 |
Ultra Member
|
|
May 2, 2005, 01:05 PM
|
|
As for ME, yeah it was bad, 95 I would call better then ME, 98 was very stable, as is xp. 98 uses less then xp, so it may have been saying it needed more ram and drive space, as for buying xp legitly, I have even seen it sold in wally mart! But yeah do listen to scott, it needs certain drivers to run.
|
|
 |
Full Member
|
|
May 2, 2005, 03:28 PM
|
|
 Originally Posted by daviee
can anyone tell me why the start up disks downloaded from different places like boot disk and startup .com wont work but the old 95 startup does! thanx
Did you unzip the files you downloaded rom those places before installing them on a floppy?
Murray
|
|
 |
New Member
|
|
May 2, 2005, 07:47 PM
|
|
Windows start disk
No I didn't unzip them I borrowed another computer and down loaded them on it and then put them on a floopy. I was suppose to unzip them then put them to floopy? Thanks and sorry for being so stupid about all this
|
|
 |
New Member
|
|
May 2, 2005, 07:52 PM
|
|
Computer
This is going to be my last try to get windows back and if I can't I'm throwing the @$#% thing out to the trash thanks to all that give me advice I can't seem to understand anything about computers so why try anymore... @$%# :mad:
|
|
 |
Full Member
|
|
May 3, 2005, 06:05 AM
|
|
The files are executable.. that means, once you download them, you have to run them to install the necessary files on a floppy..
Murray
|
|
 |
New Member
|
|
May 4, 2005, 11:11 PM
|
|
Computer
Thanks cause it has helped me a lot and want to say thanks to you all!
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Os win98se
[ 4 Answers ]
Help!
Unable to start windows, keeps going to C prompt, I have lost my floppy rescue disk. Can someone help me with this?
Win98se cab file needed
[ 4 Answers ]
I'm installing a USB card in my PC, all drivers are loaded, but I seem to have lost or misplaced my Win98se disk to compleat the install, can anyone help the file is:
Base5.cab
If anyone can help I would be so grateful.
Dual booting winxp and win98se
[ 3 Answers ]
?How do I dual boot with winxp and win98se on separate harddrives? Itried it before and ran good for 2 days then I lost my 98, had to reformat the drive, right now I'm using a switch and I'm about to build another machine tomorrow and don't want to use the switch anymore because of some errors in...
View more questions
Search
|