 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Black - 1, Orange - L, Yellow - 2, Purple - 3
Ceiling fan pull chain replacement and repair - Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...
I received a New Hampton Bay fan to replace an existing fan. The existing fan is operated by two pull chains. The new fan came with a wall control device. The problem is that the fan is not operated from the wall switch and there are no pull chains. Can I use a Hampton Bay remote with the...
I was trying to replace a ceiling fan 3 speed switch. I forgot to mark the wires. I have a red wire coming out of forward and reverse. I have a black wire coming out of the ceiling and I have a blue and black wire coming from the motor of the ceiling fan. The switch is marked L, 1, 2, 3-Do you...
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...
View more questions Search
|
