Ask Experts Questions for FREE Help !
Ask
    cheetaht2's Avatar
    cheetaht2 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 15, 2007, 01:32 PM
    MTD Self-propelled lawn mower won't start un-primed
    Hi there. I need help! My B & S engine on my MTD won't stay running. It will run just fine when primed, but then quits. I have taken the carborator off and cleaned it completely. Any other suggestions?

    Angela
    igottogonow's Avatar
    igottogonow Posts: 128, Reputation: 2
    Junior Member
    		  
    #2

    May 16, 2007, 06:07 AM
    I had a problem similar and found he fuel diaphgram that pumps fuel had a hole in it. I replaced it and it works fine.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drive cable on Troybilt self propelled lawn mower [ 1 Answers ]

I have a 21" 7hp troybilt mower and am trying to replace the drive cable. The old one broke off underneath the deck where it attached to the deck. The problem I have is getting my fat fingers in there to thread the new cable in and hook it up to the bracket on the underside of the deck. Still...

MTD central park lawn mower [ 3 Answers ]

Does anyone have information on this lawnmower

MTD lawn mower will not go into gear [ 1 Answers ]

I have a MTD 12.5 hp 38 inch cut riding mower that was giving to me.I put a battery in it and it runs fine, but when I put it in forward or reverse, it doesn't move.Can someone help me out.Thanks Mike

Mtd riding lawn mower [ 3 Answers ]

Hi every one I have a very old mtd riding lawn mower that my mother gave me but it keeps throwing the drive belt. My mother thinks that the way she was putting the belt on is wrong does any one know how the belt should go on its about a 1986 model mower.

Walk behind troy built self propelled lawn mower [ 2 Answers ]

The self propelled feature in this mower is not working properly .It does not have enough pulling power to move the mower along.Can someone tell me how to make this repair or adjustment.

View more questions Search