Ask Experts Questions for FREE Help !
Ask
    sully872000's Avatar
    sully872000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 13, 2007, 09:48 AM
    bath panel
    Hi Ive Got A 5mm Acrylic Bath But I Did Not Get A Bath Panel With It. I Want To Know Which Bath Panel I Can Use?

    The Bath Is 1500mm X 700mm
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 13, 2007, 03:12 PM
    Are you saying that you bought a bathtub that lacks a front apron? How did that come about? Cheers, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

200 amp panel feeding a 100 amp panel roughly 130' away [ 7 Answers ]

Hi all, We are building a apartment above the garage,my question is what size wire do I need to run from the 200 amp panel to the 100 amp panel roughly 130' away? I want to use aluminum wire as I think copper would be to costly. Thanks for your help in advance, Dude :eek:

Converting half bath to full bath [ 9 Answers ]

My question refers to a half bath we are in the planning stages of converting to a full bath in the basement. Currently our basement has a half bath with toilet and sink on one half of the basement. There is then a shower on the other side of the basement with the washer and dryer, about 30 feet...

Main Circuit Panel to Branch Panel? [ 1 Answers ]

Hello experts, OK... My Main Load center in my home has a branch circuit connected to a 60 amp breaker. The branch feed wire is a 4awg copper wire. The branch panel is downstairs and it has a 100amp main cutoff breaker installed in it. It feeds the whole downstairs including... (1)...

Kenmore Elite Dryer Toe panel - how to get panel OFF! [ 3 Answers ]

I have a Kenmore Elite Model # 110.600094990 27 inch Electric Dryer - NOW How the heck does one take the Toe Panel Off / or Open this lower section of the dryer? There are two lower edge clips and two upper edge retainers. I CAN NOT get the panel to budge! This is a 7 yr old unit. Thx DAS

Cutting cement for plumbing 3/4 bath to full bath [ 3 Answers ]

We are currently in the middle of changing our basement 3/4 bath into a full bath. The bathroom is 5.5' by 13.5'. We want to put the sink where the shower was and put a tub/shower where the sink was. (because the space where the shower was is too small for a tub). The old sink drain is centered 4...

View more questions Search