Ask Experts Questions for FREE Help !
Ask
    leon06's Avatar
    leon06 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 9, 2007, 08:34 AM
    Murray #42813X92A
    I need HELP!! My belt came off my riding lawn mower and now I can not get it back on the right way. I have been trying to find the manuel online and on their website but it is not avaible! Please does someone have a diagram of this?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 9, 2007, 10:21 AM
    Which belt came off, the drive belt, belt to the deck, belt around the blades? If you disengage the blade it gives you additional room. If its your drive belt have someone hold down the clutch/brake to get more room. The belt around the blades has a spring loaded tensioner that needs to be pulled back allowing the spring to contract.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray 17.5 hp 46 in [ 1 Answers ]

I need help with a mower belt diagram. I need them replaced and the small belt 37x69 has the far right pulley touching the pulley to the immediate left which is also touching the leveling bracket(fixed). Any help is appreciated. Thanks

Murray 30" [ 1 Answers ]

I have a Murray 30" and every time I try to start it, it spits gas out of the filter and the muffler. Any ideas?

Murray Panel [ 1 Answers ]

Will A 125 Amp Murray Panel Be Able To Handle 2 Double Pole 30 Amp Breakers And A 50 Amp Double Pole Breaker Dryer,water Heater,stove Will Be In The 125 Amp Panel There Are 2 Double Pole 20 Amp Breakers And 2 15 Amp Double Pole Breakers The 125 Amp Panel Is Fed By A Seimns 200 Amp Panel Outside...

Murray 5.0 won't start [ 2 Answers ]

My Murray 5.0 push lawnmower won't start. It briefly started and when I started to mow, it cut off. This happened a couple of months ago so I checked the air filter and basically knocked all the dirt out and it started like it was brand new. Now it's won't start again. I knocked the dirt out of...

View more questions Search