Ask Experts Questions for FREE Help !
Ask
    joere42's Avatar
    joere42 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 7, 2007, 03:00 PM
    SATA Raid not responding
    Please, I had to re-install WinXp home SP2(due to conlfict with CA security suite) OS WinXP home SP2, mobo MSI K8N neo4, graphics Radeon(ATI)RX 800, processor AMD Athlon 64 2.2Ghz, 2 gig RAM,sound Audigy ZS, CD-ROM(Aopen) and CD-DVD(Sony) Note: SATA Raid controls A:/, D:/ and E:/ both not showing in Device Manager. Please help! I Thank you. Joe Re'
    HVAC888's Avatar
    HVAC888 Posts: 674, Reputation: 75
    Senior Member
    		  
    #2

    May 8, 2007, 10:48 AM
    Have you installed the SATA Raid drivers? Normally when you begin the Windows install, you press F6 when it prompts you to do so, then you insert the driver diskette for the Raid Controller.

    Even if you missed this step, assuming it is a motherboard RAID solution, you can still install it from the motherboard CD.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Software RAID configuration is helpful compared to hardware RAID in any of the cases? [ 1 Answers ]

Hello, Software RAID configuration (Dynamic Disk) is helpful compared to hardware RAID in any of the cases? I haven't seen Software RAID until now. Just wanted to know the pros and cons regarding this. Thanks in advance, Vathsa

Sata problems [ 6 Answers ]

I just bought a new computer system: sapphire pure crossfire advantage mobo AMD athlon 3800+ skt939 radeon X850XT PE Maxtor 250gb sata hdd The problem I am having is that I can't install windows onto the sats hdd. When I get to the windows XP install screen it says that "windows cannot be...

Enlarge a partition under RAID [ 9 Answers ]

Hello All Expert, I would like to repartition in my fileserver. It is because that the main partition "C" drive is not enough space to install new program. My fileserver has "C" and "D" drive, "C" install windows 2000 server and "D" keep all data. Moreover the Fileserver running under RAID 1...

Sata Raid [ 1 Answers ]

Hello, Looking for a laymans explanation of SATA RAID and why it would be good to have in a Hi end DAW PC. Thanks Stu

Raid/sata150 [ 8 Answers ]

I need advice in regards to setting up RAID HDD configuration. I'm a gamer, only playing half-life, the machines primary use. Currently using a WD Raptor SATA/150 HDD. Will going to a RAID set up improve performance in this environment? Thx in advance. System profile: P4C 3.0 CPU Asus P4800...

View more questions Search