Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling Fan w/power off won't stop running!
[ 7 Answers ]
After installing my Hampton Bay Fan, everything was normal. Several weeks later, the fan began to intermittently run backwards at 6 RPM (very slow) when both the fan motor switch and the light switch, (both are wall switches) ARE TURNED OFF!! It then stopped this behavior. Now, several months...
Wiring a ceiling fan to a switch without power
[ 4 Answers ]
I just installed a new ceiling fan and want it to operate off an existing wall switch. The switch currently only operates a wall outlet in the same room. Apparently, the switch has no power, rather the power must be running to the wall outlet and then have a wire running to the switch. Is it...
Hampton Bay Ceiling fan: fan speed pull chain
[ 2 Answers ]
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?
Trouble with ceiling fan on a dual fan/light dimmer switch
[ 1 Answers ]
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...
Hanging ceiling fan from vaulted ceiling peak
[ 2 Answers ]
Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this? View more questions Search
|