Ask Experts Questions for FREE Help !
Ask
    katieee86's Avatar
    katieee86 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2007, 01:12 PM
    How to Strip wall panels indoors
    I'm not sure how to strip wall panels so I can paint them. What do I use to strip wall panels in my trailor home?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 21, 2007, 01:18 PM
    Could you tell us what the panel is made from and what's on the panel now?
    Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adding sub panels and then some. [ 19 Answers ]

Hello I am a fully qualified carpenter/builder from Ontario Canada. I have done a number of my own electrical projects on my past homes and I enjoy the challenge. I was just surfing the site looking for some ideas on my situation and I was enjoying all the good advice that you well...

Connecting two panels [ 1 Answers ]

We want to add another panel in our basement along side the original panel. This new panel has to have a 60 amp breaker and a 30 amp breaker with a 10 or 12-120 breakers. What size wire would be required to connect the two panes?

Multiple Sub Panels [ 1 Answers ]

First questions; I have a GE Box with 200 amp service. I have one sub panel and need to add 2 more. Is there a limit on how many sub panels that can be added? My home has gas heat and gas water and therefore total current is not a problem. Second question; My existing GE panel has horizontal...

How to run lines on furring strip block wall. [ 1 Answers ]

Hi there. What materials do you use to run new lines, (new construction) on a block wall that will be furred out? For example, how do you secure the lines, what size boxes, etc. Will be running a few outlets and swiches. Will I have overfill violations by going box to box? They will have to...

Painting Metal Shutters Indoors [ 1 Answers ]

Hello There I am an artist who has been commissioned to work with young people in a community centre. The project is to paint a internal roller shutter (steel or aluminium I think). I think it would be best to use spray paints but it is in inside and is a kitchen / café shutter. I would...

View more questions Search