Ask Experts Questions for FREE Help !
Ask
    TomL's Avatar
    TomL Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2007, 08:52 AM
    Troy pony belt
    The belt on lower deck has about 3 - 4 inches slack. How do I tighten or is belt wore out?
    Morrowrj's Avatar
    Morrowrj Posts: 345, Reputation: 22
    Full Member
    		  
    #2

    Apr 22, 2007, 04:43 AM
    Are you certain it is routed correctly ? See if you have a diagram either on the deck itself or possibly in your owners manual. If this is correct I would check that all tensioning springs are in place. It is possible one has snapped or vibrated lose, again I would check you manual or perhaps company website for correct positioning. I have not seen a belt stretch 3-4 inches without breaking.

    Good Luck,
    Morrowrj
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy-Bilt drive belt, brakes and shifting [ 2 Answers ]

Troy-Bilt Z809H, 24 HP B&S engine, 46" deck, 3 years old, model 14az809h063. I just had the drive belt replaced by an "authorized" repair facility. With the engine off, everything seems fine. I can shift into and out of gear easily and the brake stops the tractor cold. With the engine running,...

Troy bilt lower drive belt instalation [ 4 Answers ]

How do you get the lower drive belt around the belt keeps to get it on the crankshaft pulley?

Troy Bilt Pony Riding Lawn Mower [ 1 Answers ]

I purchased a Troy Bilt Pony riding lawn mower two years ago this summer. I started it for the first time yesterday and after mowing for about 5 minutes, white smoke started coming out of the exhaust. I stopped the mower and restarted it after a minute or so. I drove about 10 feet and the smoke...

Troy-built super bronco drive belt [ 0 Answers ]

How do you replace,or put the drive belt back on the mower? Or where can I get this information?

View more questions Search