Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do you redo the concrete slab to an attractive f . House is 60 yrs old on a slab
[ 2 Answers ]
What is the process for DIY concrete slab refinishing. Home is 60 yrs old.
Poring concrete slab on top of old slab & then polishing it
[ 1 Answers ]
Hi - we have an 11 year old polished concrete floor in our house. We did it ourselves after we removed a couple of walls. First we diamond sanded and then we put a polish on the floor. We also contacted a chemist and obtained a green paint so we ended up with green transparent polished concrete....
Concrete slab:Toilet flange below floor level
[ 4 Answers ]
I am Installing a hardwood floor on a concrete slab. In order for that type of installation I will need to build up the sub-floor with 1/4 plywood alone with 3/4 hardwood floor. I am installing this in the bathroom. The flange of for the toilet will be about an 1" below the floor level. How do I...
Concrete Slab Poured Over Concrete Slab
[ 1 Answers ]
I'm remodeling a large commercial building, +/- 100k s.f.. I'm attempting to provide a drive-thru into the existing facility by opening up the existing masonry walls to allow vehicles access pick up area and drive out with merchandise . The interior concrete slab on grade is 4-5" thk. which will...
Pouring interior concrete slab over existing, cracked concrete slab
[ 4 Answers ]
I am turning part of my carport into a new living room. I am going to pour a concrete slab about 4 inches thick over the existing carport floor which is a concrete slab. The existing slab has a few cracks, the largest of which is about an 1/8in. Wide and raised about an 1/8in. What would be the... View more questions Search
|