Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can a power tool designed for 220V 60hz be used on a 230V 50hz power source safely?
[ 1 Answers ]
I would like to purchase a specific power tool (Groove cutter) not available in my country but would like to import it from a country were the power source is different (220V 60Hz) and to then change the power plug to suit my own country (230V 50Hz). Going by a bit of Googling I have found that...
Can I run a 10-3 stw 30 amp cord 75' to rv from power source
[ 1 Answers ]
Can I run a 10-3 stw 30 amp cord to rv from power source?
One power source, two switches
[ 2 Answers ]
If I have one power source coming in, do I just pigtail the black wire to the two swtches and wire nut the white wires together? Also do I pigtail the ground to the switchor just wire them all together?I am running 12-2 wire. And controlling two different light sources. Also on 15amp breaker,...
How to run underground power source
[ 1 Answers ]
I am building a small waterfall in my backyard. Would like to know easiest and safest way to run power for the pump. There is a plug in about 10 yards away.
Gfci power source
[ 5 Answers ]
I had and existing gfci power outlet. I had some remodeling done, and now I want to put a new gfci power outlet in. Does this power come off directly from the breaker panel, or can I use an existing power source? View more questions Search
|