 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor breeze remote not synced to new receiver
Old receiver shorted out. Got replacement receiver (identical) and installed it.
Remote does not work. There are no dip switches. How do I sync the Remote to the receiver? Note: If I bypass the receiver and put 110 straight to the light wires the light comes on. |
||||
|
||||
|
How to Set the Dip Switch on a Ceiling Fan | Home Guides | SF Gate
Remove the receiver box cover to look at the dip switch settings. You will see four sliding buttons. The button configuration must match the remote control's configuration. Change the dip switch settings if necessary, moving each of the four switches to the matching "On" or "Off" settings.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Where is the Receiver box on the Harbor Breeze 52" Merrimack Ceiling Fan, so that we can change the dip switches and be able to operate them individually. Thanks!
I installed a Harbor Breeze wall remote some 6 months ago, model #UC-9050T. It also came with a separate hand held remote. Both units worked fine until one day the wall unit stopped working. None of the buttons work nor does the small red light turn on. The lower on/off switch still works and...
How to install a universal remote to a old harbor breeze fan that does not have a receiver in it?
A Harbor Breeze fan was installed in our home when we bought it two years ago- I can't find any record of the model, as the home's previous owners didn't seem to keep any paperwork of that sort. It is a remote control fan with no pull cords or manual switches of any kind, except for the switch that...
Things have been working fine w/ the remote and wall switch until now. The wall switch is a dimmer switch with a red indicator light. The remote will not turn on the light or the fan and when I push the green light button on the wall switch, the fan will sometimes come on (not supposed to control...
View more questions Search
|
