 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
X-10 Lighting With A 4 Way Switch
I have an X10 dimmer module that I just got. I am currently replacing a 4 way switch. The current 4 way switch has 4 total wires. 2 wires go into the input and the other 2 go into the output. The X-10 module has 3 wires. How do I know where the 4 wires to the X-10 module go? The new X-10 module has 3 wires labeled LINE, LOAD and SLAVE/COMPANION SWITCH. I also ordered 2 more X-10 companion module for the other 2 switches for a total of 3 switches. They are labeled LIVE, LIVE and SWITCH. I would really appreciate any help as I am new to this. Thank you.
|
||||
|
||||
|
It sounds to me like the X-10 modules are meant to be used as 3 way switches. I can't figure out how they could be made to work as 4 ways. See if the vendor can give you more info. One other thing would be to go to switch that has the incoming power feed. Connect the first X-10 module between the power feed and that switch. Then all the old switches can do the on/off and the one module do the dimming.
|
||||
|
||||
|
Here is a link of my product. I currently have 1 4 way switch and 2 3-way switches. Can I connect 1 of the new X-10 switch to one of the two 3 way swicthes that I currently have. How do I know which one?
Thank you. http://www.smarthomeusa.com/Shop/Lig.../Item/XPD3-WI/ |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have 2 buildings I want to network together. They are currently being linked by 2 hubs but I would like to replace them with switches. Is there any known performance issues with linking switches together. (e.g. Bandwidth is less on the uplinked switch) I think I already know the answer but I'd...
I just bought a house built in 1957 that has 24 volt lighting controls. The wall switches have rocker / push buttons that switch relays in a control panel to turn on / off the 120 volt overhead lights. Local electrical contractors tell me the system is obsolete and I cannot find parts. Right...
Hello, Can lights in a bathroom be on a general lighting circuit? I know a bathroom branch circuit can share receptacles with lights and other equipment only within the same bathroom. I want to put just the lights on a circuit shares with other lights in the house. Thank you for your help...
Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...
View more questions Search
|
