Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
There are 4 Branch/Feeder (Type AFCI-Type BRAF) test circuit breakers that will not r
[ 2 Answers ]
There are 4 Branch/Feeder (Type AFCI-Type BRAF) test circuit breakers that will not reset. All 4 breakers are all in the top left side of the circuit panel box, (order from top to bottom: basement lights/smoke detectors, master bedroom, bedroom 2, & bedroom 3). Two heaters (same outlet) caused...
AFCI Breakers
[ 2 Answers ]
Our volunteer group just finished the elctrical tri m out on a new Habitat home. We've done well over a 100 homes and up until noew we've never had this kind of problem. Of the 12 AFCI protected circuits in the home, we can not get 11 of them to set. They trip as we turn them on. We've had homes...
Sub-panels with 50 amp outlet and breakers being fed by two pole 100 amp main service
[ 3 Answers ]
I have a number of sub-panels with a 50 amp breaker for a 50 amp RV outlet being fed by a two pole 100 amp main service 120/240, I want to know how many 50 amp outlets I can safely install, will I need to upgrade the main service panel to accommodate more 50 amp RV outlets?
For 100 A main breaker and 7-40 A branch circuit breakers, what is size of main lugs?
[ 0 Answers ]
None
Attempting to install GFCI circuit breakers (3 wires for 2 breakers)
[ 6 Answers ]
OK here is my situation I have a Siemens box in my home I'm installing GFCI breakers to bring it up to code for insurance purposes Only thing is 4 rooms in this home are for some reason wired together on 3 wires (red black and white) connected to two separate breakers (30 Amps each) (two rooms... View more questions Search
|