Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to extend the wires to add a 4' down rod wires to short ?
[ 1 Answers ]
This is a new fan and the wires are only 18" long and I have a 4' down rod
Can I ground my generator to a copper rod driven into the ground with coax cable?
[ 2 Answers ]
I am going to test my 6000 watt generator. It is recommended that I ground it to a copper rod driven into the ground. I alread have a copper rod that is used to ground my telephone and cable lines. Can I use a length of coax cable to run from my generator ground to the copper rod?
Wires came loose while changing switch need to get wires matched.keeps blowing fuse
[ 2 Answers ]
My question is to match the right color wires to operate ceiling fan and light fixture. The wires came loose before I could match them. The swith has three colors black, red and blue. The colors that are to be matched with are green, red and orange. How do I match these. Additionally it has a...
Nec-covering of ground wire from the ground rod to the water pipecables
[ 1 Answers ]
I installed a new service meter panel and ground rod. The ground rod is connected to the meter panel via a #4 copper wire to a water pipe located 10 feet away. Is is allowable to bury the #4 wire between the ground rod and water pipe to keep it from being a trip hazard and protect the wire? ...
Ground rod wire is not connected to the ground rod
[ 1 Answers ]
My inspection report for a property that I'm looking to purchase said that my " ground rod wire is not connected to the ground rod". I have no idea what something this would cost to fix. He also said that the ground rod clamp was rotten. Am I looking at thousands in repairs? View more questions Search
|