Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
We live on an older farm , the toilets rarely flush efficiently 2nd flush is required
[ 2 Answers ]
I liv
Any problems with pipes using low flush toilets
[ 3 Answers ]
We have a small 3 story building with 12 units. And considering requiring 1.28 low flush toilets. The question I have involves the pipes which carry the sewage. If we go to the 1.28 flush toilets could it lead to problems with our pipes being clogged due to lack of water to push through the...
1.6 gal flush toilets
[ 8 Answers ]
I had to replace a toilet that is 60' from the septic tank. How can I get it to flush once , not 3-4 times just to get it to sewer line much less to the tank? It is a 1.6 gal. flush. buddy2
I have two toilets in my house. Recently both toilets have stopped fininshing flush
[ 1 Answers ]
I have two toilets in my house and recently both have stopped flushing completely. Flush starts fine, but at end of flush toilets power seems to stall out. This system is on city sewer service, and until past week or so both toilets were fine. Now I am forced to flush toilets up to three times to...
ALL of the toilets in house have low water in bowl and low pressure...
[ 0 Answers ]
All of our toilets seem to be running on low water in the bowls. The tanks are full. I see no leaks. You have to flush several times to even get toilet paper down sometimes! Then the water slowly leaks out until there is less than half the amount of water. My husband replaced the flapper (wrong... View more questions Search
|