Ask Experts Questions for FREE Help !
Ask
    aguila grande's Avatar
    aguila grande Posts: 24, Reputation: 1
    New Member
    		  
    #1

    Mar 14, 2017, 04:35 PM
    2002 Nissan Frontier, Code PO710
    How to repair a code PO710 of Nissan frontier 2002, engine 3.3 please help me.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Mar 14, 2017, 07:48 PM
    Sounds like the transmission fluid is overheating. PO710 The ATF (Automatic Transmission Fluid) Temperature Sensor converts the fluid temperature into a resistance value. The sensor resistance changes with the transmission fluid temperature. As the temperature becomes higher, the sensor resistance decreases. The Transmission Control Module (TCM) monitors the ATF (Automatic Transmission Fluid) Temperature Sensor signal. The TCM sets the OBDII code when the ATF (Automatic Transmission Fluid) Temperature Sensor signal is out of factory specifications. Might need a transmission shop to look at it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A/C problem on a 2002 nissan frontier [ 1 Answers ]

My a/c blows could and hot, could and hot on and on.

I have a 2002 nissan maxima with an engine code PO1038 02 high voltage lean bank 1, [ 1 Answers ]

I have a 2002 nissan maxima with an engine code PO1038 02 high voltage lean bank 1, 2 What do this means can anybody please help

Will a 02-04 Nissan Xterra hood bolt right on a 2000 Nissan Frontier with no mods? [ 0 Answers ]

I've seen it done before online and in magazines. As far as I can tell comparing the two side by side; everything looks identical except the headlight cutouts which I intend to fill. I think it would add a bold custom look. Just wondering. Thanks for your time!

2000 Nissan Frontier (V6 3.3L) with Knocking Sensor Code Displayed [ 3 Answers ]

We have had a knocking sensor code triggered on our Frontier on Bank 1 Sensor 1 and Bank 2 Sensor 1. We replaced all 4 oxygen sensors (Bank 1 Sensor 1, Bank 2 Sensor 1, Bank 1 Sensor 2 and Bank 2 Sensor 2) and the knocking sensor code has been triggered once again. I have put in Denso sensors and...

'03 Nissan Frontier Misfire [ 1 Answers ]

I have 2003 Nissan Frontier w/ 4cyl. Auto. The engine shudders under light acceleration at low rpm. If I press the pedal on down or let off completely it seems to smooth out. I am getting a code for " cylinder # 1 misfire". I replaced plugs, wires, cap and rotor with no noticeable improvement. My...

View more questions Search