Ask Experts Questions for FREE Help !
Ask
    alexah's Avatar
    alexah Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2016, 09:55 PM
    Goodman furnace fire problem
    Unit will stert-run for 3-4 minutes, flames kick off high limit is open when it restarts (blower still running) flames back out of burners for a few seconds, enough to burn some wires blower is clean
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 7, 2016, 01:15 PM
    I'd check for a blocked return, dirty filters, possibly blocked supply ductwork, possibly a partially blocked vent pipe.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace won't fire up [ 1 Answers ]

When I turn my thermostat to call for heat inducer fan kicks on then a click them ignitor glows another click no flame, does this three times then locks out. I checked everything. Error code blinks once indicating gas flow/gas valve(check) bled the line & I don't know how to check the valve without...

Goodman Furnace problem [ 2 Answers ]

I have a Goodman Dependable Nintytwo furnace. The draft inducer motor comes on but the furncae does not light. The motor will run for long periods. It will kick off then kick back on and the furnace will light. The furnace is not consistent, sometime it lights and sometimes it does not. It has...

Goodman furnace cracks near fire inlets [ 1 Answers ]

My Goodman Air/Furnace has cracks in the metal near where the fire blows into. Is this normal? Should it be a worry? I have tested numerous times and locations in the house for carbon monoxide and found zero every time. By the way, the unit works great and is about 10-12 years old.

Goodman Furnace Issue - Heater won't work, no fire [ 1 Answers ]

My Goodman heater won't fire up. When I turn the heat on, the sequence of events: 1) Small fan at top section turns on. 2) Heating element turns on, bright red. The system sounds like it is trying to turn on. 3) Then the bright red goes off. The fire does not light. The fan does not start 4)...

Goodman Furnace won't keep fire up [ 2 Answers ]

I have a Goodman GMP100-5, age uncertain, maybe 6 years. The burner fired up for 7 seconds or so and turned off. After 3 cycles it went off. The status light blinked once. Since the gas fired OK. I replaced the flame sensor. It still does the same thing after the flame sensor replacement. It is a...

View more questions Search