Ask Experts Questions for FREE Help !
Ask
    SKHouston's Avatar
    SKHouston Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 16, 2016, 10:57 PM
    Bulb Question on the GE SunSmart Digital Timer 15312
    Will this timer work with a halogen bulb? I have installed and set up all the features but the light will not come on... even if I override. But, I have a halogen bulb in my fixture. Is this the problem?

    Thx!
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Jul 17, 2016, 05:02 AM
    Change the bulb in your fixture and see what happens. Does the halogen bulb work in other fixtures? Who did the install of the timer?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Jul 17, 2016, 05:12 AM
    Sure it is the right voltage bulb? Have you measured the voltage output of the timer?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

This is my second woods digital heavy duty timer model 50015 the timer dies on me why [ 1 Answers ]

I have a woods digital heavy duty timer model 50015 I used for aquairium lights all together give me about 140 watts this is the second one I bought, after a couple months the digital display goes really light on me and stops working, can't reset it don't work and can not reprogram it, nothing...

Sunsmart digital timer single pole wiring [ 1 Answers ]

I am trying to wire in a GE sunsmart 15312 digital timer. The switch I am replacing has only black wires. Two on top and two on the bottom. The instructions state that some installations have only balck wires but the instructions do not tell me how to install when there are only black wires. ...

Troubleshooting ge sunsmart timer 15312? [ 0 Answers ]

I am having a problem. My lights will not turn on, not even with the over ride switch. I have an older house that does not have ground wires. I guess my question would be do I need the ground for the timer to work? The display is lit up, it does run through the programing steps but no light. ...

Wiring a Sunsmart Digital Timer [ 1 Answers ]

I am trying to wire a digital time from one light switch to control two lamps outside my garage. There is another light switch right next to it that controls two lamps inside my garage. I tried to replace the switch this morning and could never get it to work. Attached is a picture of the wiring...

Converting mercury bulb thermostat to digital [ 3 Answers ]

I have a TRANE XL1200 Weathertron heat pump with auxiliary heat. It is controlled by a Trane 3AAT80A1A1 mercury bulb analog thermostat. I have purchased a RiteTemp 8050C digital programmable thermostat to replace it. The analog thermostat has wired terminals marked O,R,T,G,Y,X2,B,W and F. It...

View more questions Search