Ask Experts Questions for FREE Help !
Ask
    BLHeckenberg's Avatar
    BLHeckenberg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 30, 2016, 12:39 PM
    Condenser Fan Blades, 28 in dia
    I want to purchase a Condenser fan blade, 28 in dia, 20 deg pitch
    Where do I go. Granger & Amazon were no help.
    This came off a Trane heat pump, Model: 2TWR3036A 1000AA
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Apr 30, 2016, 02:17 PM
    Have you tried Google yet? Always works for me.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Apr 30, 2016, 04:43 PM
    Why not Trane? They have parts suppliers.
    Trane Supply | Parts & Supplies | Trane Commercial
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need the part #s for my rheem a/c condenser fan motor and fan blade and fan grill [ 1 Answers ]

Hi I need to know the parts #S of my rheem a/c condenser unit for the fan motor and fan blade and fan grill? Model # is ralc-g4zjaz

Replacing a Rheem 5 wire condenser fan motor with an Emerson 4 wire condenser Fan [ 0 Answers ]

I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...

Trane condenser fan motor to A.O.Smith condenser fan motor [ 2 Answers ]

The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...

Ceiling fan blades catch on casing for light below. Can I adjust blades to raise them [ 1 Answers ]

Hi. I installed my Kendal ceiling fan and light but the blades won't turn on their own. The motor hums and if I turn the blades to get it going they turn, but there is a hideous grinding noise as the blades rub against the light casing below. Is there any way to adjust the blades so it will turn...

View more questions Search