 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heating system
Hello, our attic bedroom rad was cold at the top and hot at the bottom and all other rads in house was OK. I bled the air out of the article rad and all the other rads and all rads was working fine but the ground floor rads are completely cold, even the water pipes up to the rads at the valve. I have tried to balance the rads by shutting all the valves on the working rads which sorted the front living room rad out. I shut the valve on this one to balance the kitchen rad but still nothing. Now the boiler keeps saying water flow lockout and none work 😔
|
||||
Check out some similar questions!
Hi... I have an infloor heating system install (Schluter Ditra system), that needs to be run on a 240 volt breaker. I've installed a 14/2 wire from the thermostat box to the breaker, and install a 15 amp, 240 volt double pole breaker. I've connected both the black and the white (usually...
Hi, I have a basic question about heating. Is it possible to change a forced hot air system to a baseboard heating system? And if so, what does it involve exactly? And approximate prices, for about 5000 sq feet house. Thank you very much.
When considering converting from forced hot air to baseboard heat, is it possible to just add piping / water boiler / baseboards and do nothing with the forced hot air system (use it for AC) ?
I am having infloor heating circulation problems, My pump is running and the water at the pump is hot but it is not running through the rest of the piping. What would cause the water not to circulate?
I am renting a home that is 50 years old. It has recently turn cool, low 30s. If I turn the heating/air switch to heat and 70 + degrees. All I get is cool air coming out of the air vents. Can someone tell me what things I should do before calling heating specialist?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
