Ask Experts Questions for FREE Help !
Ask
    euladue's Avatar
    euladue Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2016, 07:17 PM
    Bryant Electric Furnace model #960B024010 heating element problems
    Heating element won't shut off when the fan does ?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Feb 2, 2016, 01:47 PM
    Sounds like you have a bad sequencer. They are timers that turn the coils on and off. You may have a case of welded contacts. They are not hard to replace or very expensive-$30-40. Google "Bryant Electric Heater Sequencer."
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric furnace heating element staying hot [ 3 Answers ]

Eb17b coleman evcon electric furnace heating element stays on even after unit shuts off... already changed sequencer...

Coleman electric model 3400a818 heating element heats up but blower doesn't kick on [ 4 Answers ]

Heating element heats up about every 60 seconds. Sometimes, it goes off without the blower kicking on and other times the blower doew kick on. If the blower switch is put in the on position the blower runs just fine. Do I need to replace a sequencer?

Electric iceco furnace heating element not getting power, possible solutions [ 0 Answers ]

I have an iceco furnace which in the heating mode only one of the two elements is coming on. The one element is not reading any voltage or current. Possible solution needed

Nordyne Electric Furnace Heating Element [ 2 Answers ]

Hello, I have A Nordyne Electric Furnace- model# E2EH-012HA, and the heating element stays hot Even with thermostat in the off position, and, of course, the blower runs also with the element remaining hot. I have to turn the breaker off to stop the element from heating. Any help would be...

Electric Furnace - heating element [ 3 Answers ]

I am trying to convert from my broken boiler furnace to an electric furnace. I have central air and all the vents from that. Can I just buy a heating element and put it into the air handler? If I can, how do I know what size heating element to buy? The search on the internet gave 10 and 15 KW...

View more questions Search