Ask Experts Questions for FREE Help !
Ask
    antiqueauction's Avatar
    antiqueauction Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2016, 11:57 AM
    Fasco
    Any have a reference for replacing a Fasco / Trane inducer motor or have a crossover
    # for a fasco motor # 702111831 ///
    It also has a Trane # D671914P01

    Thanking All of You in Advance

    antiqueauction
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 19, 2016, 12:22 PM
    https://www.bing.com/search?q=Fasco+...nce&FORM=QSRE1

    There are some with that number on EBay.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #3

    Jan 19, 2016, 12:36 PM
    https://www.askmehelpdesk.com/heatin...ng-820598.html

    Again the parts look up failed to return a model match,

    http://www.repairclinic.com/vwo10/Sh...ts/a36b371c53-
    x64363731393134703031/D671914p01-Trane-Furnace-Motor-Parts

    so I provided the images/with part numbers,

    OR OR OR

    Call Trane for additional help,

    https://www.trane.com/residential/en/customer-care.html
    antiqueauction's Avatar
    antiqueauction Posts: 7, Reputation: 1
    New Member
    		  
    #4

    Jan 20, 2016, 11:19 AM
    Quote Originally Posted by ma0641 View Post
    https://www.bing.com/search?q=Fasco+...nce&FORM=QSRE1

    There are some with that number on EBay.
    Thanks
    It sold already,
    Had no fan .
    antiqueauction
    antiqueauction's Avatar
    antiqueauction Posts: 7, Reputation: 1
    New Member
    		  
    #5

    Jan 20, 2016, 12:08 PM
    Quote Originally Posted by talaniman View Post
    https://www.askmehelpdesk.com/heatin...ng-820598.html

    Again the parts look up failed to return a model match,

    http://www.repairclinic.com/vwo10/Sh...ts/a36b371c53-
    x64363731393134703031/D671914p01-Trane-Furnace-Motor-Parts

    so I provided the images/with part numbers,

    OR OR OR

    Call Trane for additional help,

    https://www.trane.com/residential/en/customer-care.html
    Thanks , All have said the replacement is the BLW1310
    & and it comes with a Capacitor mounted on it's side

    I hope the wiring is compatible
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Please help wiring 3 wire ac fasco motor [ 0 Answers ]

Dear All. I have this motor from the blower( too old but never used).and not find this model on internet. Please see the picture Thank you. red + black = appr. 12 mhenry white + black = appr. 15 mhenry Please could you help me to wiring this motor with schema diagram(for easy to...

Fasco inducer motor pauses after 5- 8 seconds? [ 0 Answers ]

A Lennox 67k0401 combustion inducer motor was recently replaced with a Fasco A163 motor. After the inducer motor starts. There is a pause about 5- 8 seconds then it runs OK. Is The motor defective? What's causing this?

Nordyne miller fasco inducer motor [ 0 Answers ]

My 1997 Nordyne/Miller furnace Model G5RC-060C-12, G5R9606-01232 stopped working and signaled 2 red-blinking lights--pressure switch open. I checked tubing for kinks and blockage-none found. I cleaned condensate tank and re-filled with water. Air filter is new. I shut down furnace. Next morning...

How many condensation plugs are on a Fasco blower motor? [ 0 Answers ]

There are two plugs side by side at the top. The top one on the left side has a yellow cap and the right side is uncapped. The one plug on the bottom has a yellow cap. Should they all be capped?

How to wire 220v Fasco heater ? [ 1 Answers ]

I have an older hot air (fan driven over coils) in wall heater. In is essentially new in a box never used for about 8 years. I want to use it now, but when I went to wire it up I can't figure out where the neutral should be connected to. The unit has a Black, Red and frame ground ready to be...

View more questions Search