Ask Experts Questions for FREE Help !
Ask
    edwinsession's Avatar
    edwinsession Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2015, 05:48 PM
    Inducer motor does not work
    Draft inducer motor does not turn on when heat is called for. Motor has been replaced. Code light does not blink.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 28, 2015, 06:12 PM
    Checked thermostat? Check voltage for the inducer at the control board, should be 120VAC. Make sure a safety devices are OK-roll out switches and high limit. Check the fuse on the board.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I took off inducer motor mounting bolts but can't pull motor out [ 2 Answers ]

I can't pull out inducer motor for bryant plus 90 furnace. I have mounting bolts off but shaft is holding me mack. How do I get it to release?

Inducer motor? [ 1 Answers ]

When I turn my thermostat on at first I hear a humming then it blows hot air then cold air. I was told I need an Inducer motor? Does that sound correct?

COMFORTMAKER inducer fan motor runs but furnace won't WORK? [ 0 Answers ]

I have a comfortmaker gas forced air furnace that has me scratchin a bald spot in my head. When the t'stat calls for heat, the inducer fan turns on, I hear a click in the valve, but then nothing happens. Normally the pilot sparks on & immediately the burners fire up. It might be just...

How much for an inducer motor? [ 1 Answers ]

How much should it cost to replace a goodman inducer motor that is humming?

What is the inducer motor [ 3 Answers ]

I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...

View more questions Search