Ask Experts Questions for FREE Help !
Ask
    Tremain Levier's Avatar
    Tremain Levier Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 20, 2015, 07:10 AM
    How do u wire a zettler fan center
    My friend got a kitchen aid furnace ac add on... wit fan center relay. I need to know how to wire the relay part( wire to wire) r a (schematic of a dpdt zettler replacement) the old one is Honeywell

Check out some similar questions!

How do you wire a fan center relay on a wood electric furnace for air conditioning [ 0 Answers ]

Trying to wire a Honeywell fan center for an a/c on a wood electric furnace. The motor is a 220V with a switching relay. Does anyone have some input for this issue?

How to wire a DPDT Center-OFF Rocker Switch Maintained [ 1 Answers ]

Hello, just joined, I am axious to learn... My bathroom has 1 fan, 1 set of lights, and 1 outlet. I would like to install a "Leviton Ivory DPDT Center-OFF COMMERCIAL Decora Rocker Switch Maintained Contact 5686-2I" to make it work this way: Position On 1: Lights and outlet Position...

Replacing a Rheem 5 wire condenser fan motor with an Emerson 4 wire condenser Fan [ 0 Answers ]

I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...

Replace 4 wire ceiling fan (& wall plate 2 wall sliders), with 5 wire fan + remote? [ 6 Answers ]

Hi all, Current configuration: Wall switch that has 2 sliders, one for the fan (has multiple speed capability) and the other for the light (has dimming capability). Our wall slider switch looks like this one (but not this make/model), just for FYI: Hunter Fan/Light Dual Slide Preset Control -...

How do I wire eight arms to the center stem of a chandelier? [ 5 Answers ]

I have a new glass and silver chandelier, styled after a gasolier, that was shipped dismantled. I can reassemble the parts, but don't know how to rewire the arms to the center stem. All the wires are clear plastic, (they look like standard twinned lamp wire, not heavy gauge or anything special),...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.