Ask Experts Questions for FREE Help !
Ask
    Shiny Penny's Avatar
    Shiny Penny Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2015, 06:12 PM
    I removed the allen srcew but handle still will not come off, there is a second hole?
    Moen one handle kitchen faucet handle removal
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 17, 2015, 07:33 PM
    Chances are corrosion has kept them together. Try some WD40 in the hole and heat a bit with a hair dryer. Sometimes you need a lot of upward pressure.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #3

    Dec 17, 2015, 08:24 PM
    Try lightly but rapidly jiggling it...
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #4

    Dec 18, 2015, 01:29 AM
    I would suggest to spray some vinegar inside the hole leave it to soak then try jiggling an pull up, good luck.

    John
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #5

    Dec 18, 2015, 07:24 PM
    Wiggle it out

    Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can't get handle off a Delta Monitor shower faucet? I loosened the allen screw [ 4 Answers ]

Delta single handle no water comes out tub will come out removed handle [ 0 Answers ]

Delta single knob tub/shower faucet. Very little water comes out faucet. When we took off the knob and turned on the water we had great water pressure come through the open handle pipe could not get it pressurized to run out shower. Plumber put on new cartridge but still not much water came out.

Tub spout leaking at the allen key hole when water is turned on [ 1 Answers ]

My danze tub spout is leaking at the allen key hole when the water is turned on. How do I fix it or is this normal?

Removed switch, hole in wall plate [ 3 Answers ]

Hi, I removed a switch from a circuit inside a 3-gang box. Now I have a hole in my switch plate. I'm assuming there's something I can find that will be a kind of "dummy switch" and basically cover the hole in the switch plate from the inside. Does anyone know if such a thing exists, and if so...

View more questions Search