Ask Experts Questions for FREE Help !
Ask
    RUTGAR's Avatar
    RUTGAR Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2015, 01:07 PM
    Carrier 8000 weathermaker wiring for a Honeywell RTH111 thermostate
    Replaced thermostat followed instructions to the tee. Fan works, no heat. Need to know how the wiring should be for a Honeywell RTH111 thermostat for a carrier 8000vs weathermaker.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 17, 2015, 03:32 PM
    That is a basic non programmable T'stat. We can only guess since we would follow the T'stat guide. Look at the control board and the T'stat wiring and make sure they are in sync.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

FA Carrier 8000 weathermaker [ 7 Answers ]

Getting a 12 error code. The blower starts but no ignition. I checked the ignitor seems OK and the flame sensor I lightly sanded. Still same result. Any ideas?

Carrier Weathermaker 8000 [ 4 Answers ]

Hi, I am having a problem with my Carrier Weathermaker 8000, Last night when we went to bed, everything was fine, this morning when we woke up it was a chilly 61 degrees in our home. Our neighbor came over to try and fix the problem, but, now we can't get the heater to come on at all, before while...

AC Wiring issue (Carrier Weathermaker 8000 24v error code) [ 4 Answers ]

I have a Carrier Weathermaker 8000 furnace, which I just had the Control Board changed. Tried turning on the AC and nothing. Get the 24 error code which is 24 volt short. Keeps blowing the 3 amp fuse. Have replaced the wires from the Condenser to the control board. If I remove the wires from the...

Carrier weathermaker 8000 [ 3 Answers ]

I have a carrier weathermaker 8000 gas furance... when the thermastat calles for heat the furance turns on it willgo for 3 for 4 min... then the flame stops and the blower runs for the 128 seconds... this is all normal... but the thermastat is still calling for heat and the furance kick on again...

View more questions Search