Ask Experts Questions for FREE Help !
Ask
    Musicfrk9's Avatar
    Musicfrk9 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 1, 2015, 06:41 AM
    Gupi100-5 won't ignite
    The furnice will not ignite
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 1, 2015, 08:46 AM
    This is a Goodman, yes. How about some more info. What happens when it calls for heat? Inducer run? Surface igniter glows? Codes on control board? You don't give us much to go on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Burner won't ignite [ 3 Answers ]

My igniter is glowing but burner won't cut in power vent also runs . I thought it must be a sticking regulater so I installed a new one but still no go

Why won't it ignite [ 1 Answers ]

Category 1 gas furnace for trailor(not the kind you light). It starts but won't ignite

Goodman GUPI100-4 will not ignite [ 13 Answers ]

I have a Goodman GUPI100-4 furnace that won't ignite and both, the inducer fan and blower motor are running when powered on. I have tried the following to correct the problem - replaced ignitor assembly, replaced pressure switch, removed inducer fan to replace dry-rotted gasket with high-temp...

Janitrol GUPI100-4 ignites, but won't light [ 3 Answers ]

Just like the title says, I have a janitrol gupi 100-4 that will power up, and ignite for 5-10 seconds, but the burners? Will not light up. Not sure what to check, any advice?

Furnace won`t ignite [ 1 Answers ]

I have an Armstrong Natural Gas Furnace,and the orange hose that goes to a sensor doesn`t work sometimes, and the furnace blows cold air. If I blow in the hose, it will work the next time, but I can`t do this all winter. It gets cold in the middle of the night.

View more questions Search