Ask Experts Questions for FREE Help !
Ask
    Matt Meck's Avatar
    Matt Meck Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2015, 06:20 PM
    Nordyne error codes
    Gibson nordyne control board blinking 3 flashes of the red led indicator. It cycles once after the emergency reset is triggered.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 24, 2015, 09:06 PM
    What type of heater, gas, heat pump?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nordyne troubleshooting codes [ 0 Answers ]

I have a nordyne heat pump , mod. # FG6RC 080N-16B, that does not always start when the thermostat is turned on. The led light blinks 4 times. I checked and cleaned the ground. No change. If I turn the power breaker off for a few seconds and then turn it back on, the furnace starts.

Nordyne furnace led codes [ 0 Answers ]

What does an led flashing 4 times mean

Nordyne furnace codes? [ 2 Answers ]

I have a Intertherm Nordyne Model#MMBB-056ABHR-06 gas fired furnace with "NO HEAT". It was manufactured 12/96. The electronic control board is blinking 3 times. Also the pre-blower seems to work right and the board clicks I believe properly. What could be the problem?

Nordyne LED blinkin codes [ 5 Answers ]

Can someone give me the codes for all the Nordyne LED blinks? My furnace was blining 4 times, I replaced the igniter and now it is blinking 2 times... All the codes would be greatly appreciated - thanks, in advance. :cool:

Nordyne furnace codes? [ 0 Answers ]

Nordyne model #g4ra072c-12 code lightblinks continiously and the blower motor will not shut off.

View more questions Search