Ask Experts Questions for FREE Help !
Ask
    Airtech's Avatar
    Airtech Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 7, 2015, 09:14 AM
    The blower starts and circuit board flashes 4 times
    The blower starts and the circuit board flashes 4 times. I don't have the paper work form the codes. Nothing else happens.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Nov 7, 2015, 09:41 AM
    Since you didn't give us any data regarding the manufacturer, we can't help you. Codes are not consistent through brands, it depends on the control board.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York board flashes 5 times [ 10 Answers ]

York gas apck model #D3GA024N04206A fan runs continuously even with thermostat off unless I pull the power but will not ignite. Board is flashing 5 times. The small fan that runs to pull the gases out before ignition is running and I have air coming through the house vents, just no ignition and no...

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

No gas replaced circuit board St9120c w/ St9120u Now gas shuts off when blower starts [ 1 Answers ]

I'm hoping some one can help. I've been without heat for a week. I have a nordyne g3ra096c-16 furnace. The problem was the ignitor would glow but the gas valve wouldn't open. I tried to trouble shot it myself but had to call a technician. He came and said it was the circuit board and would cost...

My furnace fault code light flashes three times the pause and flashes three times aga [ 0 Answers ]

Furnace fault code flashes three time and pause then flashes three times. Just repeating itself. What is it telling me?


View more questions Search