 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cannot remove bathtub spout
I have a 60 year old bathtub with original plumbing. The diverter only sends a small amount of water to the shower head. I replaced the faucet washers, but cannot remove the tub spout . It does not have a set screw. Vice grips with a 3 pound sledge hammer did not budge it. How do I take this old faucet off?
|
||||
|
||||
|
Get the biggest pipe wrench you can to break that 60 year old grip. Also, big pipe wrench will give you good leverage and will make the spout removal easy. Once you break the grip with large wrench, you can use smaller tool to finish the removal
Hope that helps Milo |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I recently had a new diverter in my tub. When I turn on the water after an extended period of not using it, the water is a rusty color. It was never like this before. Why would it do that?
I have a 27 year old spout that is corroded and needs replacing. It has a set screw on the side which a flat head screwdriver can fit in. The dang screw will not budge. I have even tried a drill. I have sprayed on WD40 and Kaboom (which dissolves hard water buildup). It is stuck on there. Any...
I am a first time home owner and the spout in my guest bathroom is leaking. I all parts are new and it is a slight leak, but a leak non the less. I have taken the spout off, but I don't know what to look for and have not found anything on line that would fit my particular situation. Not sure why I...
Is spout offset equal on all spouts
I want to replace the bathtub spout with a new one available at hardware store. I tried unscrewing the old spout barehanded and it won't budge. Can I use a wrench (I don't care if the old spout is marred), or is there a danger of breaking the pipe in the wall. I do NOT have access to the...
View more questions Search
|
